fbpx
, ,

HIKOKI 36V BRUSHLESS SDS-MAX HAMMER DRILL C/W 2 X 4.0AMP BATTERIES


PRODUCT CODE: DH36DMA

Image result for hikoki logo

805.65 Inc Vat

Compare

DESCRIPTION

ELECTRIC(AC)PERFORMANCE WITHOUT THE CORD

The MULTI VOLT DH36DMA cordless rotary hammer is our first SDS-max cordless rotary hammer that uses the high-power BSL36B18

MULTI VOLT battery and a brushless motor. It delivers a drilling speed and demolition performance comparable to its corded counterpart.

  • Drilling Speed*

    Speed of the DH40MC rotary hammer indexed at 100.

    When drilling a Ø25mm hole into concrete with compressive strength of 2,352N/cm2 (240kgf/cm2).

  • Demolition Performance*

    When demolishing concrete with a compressive strength of 2,352N/cm2 (240kgf/cm2).

  • Runtime per Charge*(with BSL36B18 battery)

    Approx. 25 Holes (Drilled in Ø25x60L Concrete)

    Approx. 11 Min. (Equivalent to 26kg Concrete Breaking)

  • Values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions.

ROBUST LOOKS

  • With part of its aluminum die-cast cylinder case and crank case

    exposed, the DH36DMA looks robust and sophisticated.

EASE OF USE

  • One-push Bit Mounting

    Only one action instead of the conventional two is required to mount a bit. All that needs to be done is to insert the bit into the tool holder while turning it.

  • Large Change Lever

    Large change lever is located on top of the tool body for easy visibility and smooth mode changing.

     Hammering (for demolition)

     Neutral (for multiple bit-angle settings)

     Rotation + Hammering (for drilling)

Multiple Bit-angle Settings

The chisel can be rotated at 12 different angles with the change lever positioned at ‘neutral’.

  • Low Vibration Handle

    The HiKOKI low vibration handle, which consists of the upper unit with rubber dampers and the lower unit with a hinge, reduces vibration and user fatigue, offering high productivity.

Constant Speed Control with Variable Speed

Four-step impact rates between 1,420bpm and 2,860bpm can be selected by the rotation speed selector switch.

Display Lamp
RPM 260 340 410 590
BPM 1,420 1,850 2,240 2,860

SAFETY

  • Battery Stopper

    A battery stopper helps prevent the battery from accidentally falling out of the tool. The battery cannot be removed unless both the stopper and the battery latches are released.

REACTIVE FORCE CONTROL

RFC

  • When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool’s built-in controller stops

    the motor’s output before the entire tool jerks.

Caution

Depending on operating conditions, the Reactive Force Control function may not work or may not provide the

specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.

SPECIFICATIONS

Capacity Concrete 40mm (1-9/16″)
Core Bit 105mm (4-1/8″)
Bit Shank SDS max
Battery Voltage 36V
No Load Speed 260 – 590/min
Full Load Impact Rate 1,420 – 2,860/min
Overall Length 496mm (19-17/32″)
Weight*1 7.9kg (17.4lbs.) with BSL36B18
Vibration Total Values*2

(triax vector sum)*2

Hammer Drilling into Concrete Vibration emission value ah, HD = 11.8 m/s2
Uncertainty K = 2.6 m/s2
Equivalent Chiseling Value Vibration emission value ah, CHeq = 9.6 m/s2
Uncertainty K = 1.5 m/s2
Standard Accessories*3 2 Batteries (BSL36B18), Charger (UC18YSL3), Side Handle,

Depth Gauge, Battery Cover, Grease A (30g), Carrying Case

  1. Weight according to EPTA-Procedure 01/2003.
  2. The vibration total values were determined according to EN60745.
  3. Supplied accessories vary by country or area.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “HIKOKI 36V BRUSHLESS SDS-MAX HAMMER DRILL C/W 2 X 4.0AMP BATTERIES”

There are no reviews yet.